On this page, you can find the official link to Download Nothing Phone 2 Stock Firmware ROM (Flash File) on your computer. Firmware comes in a zip package containing Flash File, Flash Tool, USB Driver, and How-to Flash Manual.
The size of the device is 6.7 inches LTPO OLED capacitive touchscreen while the resolution of the screen is 1080 x 2412 pixels and it is protected by Corning Gorilla Glass + Always On Display. The smartphone runs on the Android 13 + Nothing OS 2 operating system while internal storage is 128 GB, 256 GB, 512 while the RAM is 8 GB, 12 GB.
Nothing phone (2) consists of a dual camera: 50 MP (wide) + 50 MP (ultrawide) camera while on the front there is a single 32 MP (wide) camera. The device is available in White and dark Gray. The smartphone is fueled with a non-removable Li-Po 4700 mAh battery + 45W wired, PD3.0, PPS, QC4, 100% in 55 min (advertised), 15W wireless, 100% in 130 min (advertised), 5W reverse wireless.
It features Bluetooth 5.3, USB Type-C 2.0, OTG, and GPS (L1+L5), GLONASS (L1), BDS (B1I+B1c), GALILEO (E1), QZSS (L1), NavIC. The smartphone is powered by Qualcomm SM8475 Snapdragon 8+ Gen 1 Octa-core processor while GPU is Adreno 730. It also supports Dual SIM and sensors include under display, optical fingerprint, accelerometer, proximity, gyro, and compass.
Readme Once:
[*] Take a Backup: If you are going to flash or install the above Firmware on the Nothing Phone 2 device, then take a backup of everything because your data will be deleted or removed post flashing or installing the Firmware.
Nothing Phone 2 Stock Firmware (Flash File)
The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue.
File Name: Nothing_Phone_2_230709_2.0.1_OTA.zip
File Size: 2.74 GB
How to Flash (install): Copy the update.zip file to the phone SD and flash it through the stock recovery mode.
How to Flash or Install Firmware (ROM)
- Download and extract the Nothing Phone 2 stock firmware package on the computer.
- After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver, and How-to Flash Guide.
- Install the provided USB Driver on the computer (if the USB Driver is already installed, then SKIP this step).
- Follow the How-to Flash Manual to Flash or install the Firmware on your Nothing Phone 2 device.
Discover more from Nothing Blog
Subscribe to get the latest posts sent to your email.
